UBCD396XT
17
being scanned blinks.
In Hold mode: This line displays the GQK
number of the current group only.
In Custom Search mode: The numbers of any
programmed search ranges are display on this
line. The number of the custom range that is
currently being searched blinks.
Hold icon
The scanner is in Hold mode.
IFX icon
You switched to the intermediate frequency
(IF exchange).
Keypad lock (or GPS)
Icon
: The keypad is locked. (Available only
on handheld models.)
GPS: The scanner is receiving data from the
GPS device.
Lockout icon
The current channel is locked out.
Modulation icon
This icon displays the modulation type of the
current channel: AM, FM, NFM, FMB, or
WFM.
Priority icon
The current channel is set as a priority
channel.
Priority scan icon (PRI)
Steady: Priority scan is turned on.
Blinking: Priority Plus scan is turned on.
REP icon
The Repeater Find feature is turned on.
Signal level icon
This icon displays the strength of the current
signal; the icon ranges from zero bars (no
signal) to five bars (strong signal).
System number line (Sx:)
In Scan mode: The system/site Quick Key
numbers (SQK) of any unlocked systems or
sites are displayed on this line. The SQK
number of the system or site that is currently
being scanned blinks. For SQK numbers
above 9, the tens digit replaces the X in the
icon; the ones digits are shown on this line.
In Hold mode: This line displays the SQK
number of the current system or site only. For
SQK numbers above 9, the tens digit replaces
the X in the icon; the ones digit is displayed on
this line.
In Service Search mode: The icon SCR
replaces the System numbers if the broadcast
screen feature is turned on.
Summary of Contents for UBCD396XT
