UBCD396XT
55
2.
Go to the
Set Frequencies
sub-menu and select
New Frequency
.
3.
Enter at least 1 frequency for this site.
4.
If you need to change any of the frequency properties, you can do that now.
Unless a property is
Required
, you can operate the system without changing
the default settings.
Frequency properties
All of these options can be found by selecting the frequency under the
Set
Frequencies
sub-menu. If necessary, the sub-menu and option name on each
scanner are listed beside the property.
Property Option
Name
Required
None
Recommended
None
Optional
Lockout
Set Lockout
Available operations
Delete a frequency
Delete Frequency
Programming a system for Scanning
Once you create the system and at least 1 site, you can
Search
the system with no
problems. However, if you want to
Scan
the system, you'll need to program the
required elements in following order.
Create a channel group
Each P25 system can contain up to 20 channel groups.
1.
On the
Program System
menu, select the system you just created.
2.
Go to the
Edit Group
menu and select
New Group
.
3.
If you need to change any of the channel group properties, you can do that
now. Unless a property is
Required
, you can operate the system without
changing the default settings.
Channel group properties
Summary of Contents for UBCD396XT
