38
1. Select a channel (1 ~ 8, or All) whose motion sensor recording
schedule you want to set up.
2. Select the erase icon ( ) and click on the 1-hour recording
blocks you DO NOT want that channel to record.
3. When you have the schedule set up as you want it, select
Apply
.
The configuration for that channel is now saved.
4. If you want to use that same configuration on another channel,
select that channel in the dropdown box for
Apply Settings To
.
Then, select
Copy
. The configuration is now saved on the second
desired channel.
5. If you want to apply the settings from one channel to ALL
channels, select
All
in the dropdown box for
Apply Settings
To
. Then, select
Copy
. The configuration is now saved on all
channels.
6. Select
Exit
.
Sensor Tab
This tab sets up a recording schedule for other motion sensors (not
included). (Default = All recording blocks selected)
1. Select a channel (1 ~ 8, or All) whose sensor recording schedule
you want to set up.
2. Select the erase icon ( ) and click on the 1-hour recording
blocks you DO NOT want that channel to record.
3. Select one-hour blocks to remove from the recording schedule.
4. When you have the schedule set up as you want it, select
Apply
.
The configuration for that channel is now saved.
5. To
copy a
configuration
to
another channel, select that channel
in the dropdown box for
Apply Settings To
. Then, select
Copy
. The
configuration is now saved on the second desired channel.
6. To apply the settings from one channel to ALL channels, select
All
in the dropdown box for
Apply Settings To
. Then, select
Copy
.
The configuration is now saved on all channels.
7. Select
Exit
.
Summary of Contents for UDVR45-4
Page 84: ...84...
