Hold the base of the mount where you want
to attach it, and mark the location of the
screw holes.
Use the included screws and anchors to
attach the base to the wall or ceiling.
Attach the camera to the mounting screw.
Tighten it a few turns, then turn it to the
direction you want.
Tighten the camera brace up against the back
of the camera to secure it into place.
Unlock the mounting post by turning the
wingnut to the left a few turns.
Set the mounting post to the correct angle,
then tighten the wingnut until the post is
locked into place.
1.
2.
3.
4.
5.
.
Camera
brace
Mounting
screw
Mounting
post
Post
lock
Screw
holes
Camera
brace
Mounting
screw
Mounting
post
Post
lock
Screw
holes
1
2
4
3
Loosen the
wingnut to
unlock the
mounting
post.
Attach the camera
to the mounting
screw and turn it
to the desired
direction.
Adjust the post to
the correct angle,
then tighten the
wingnut to lock the
post into place.
Tighten the brace against
the camera to
secure it
in place.
1
2
4
3
Loosen the
wingnut to
unlock the
mounting
post.
Attach the camera
to the mounting
screw and turn it
to the desired
direction.
Adjust the post to
the correct angle,
then tighten the
wingnut to lock the
post into place.
Tighten the brace against
the camera to
secure it
in place.
