REPLY DELAY
While scanning, the
stops at a busy channel and
receives a transmission. When the received signal is over, the
unit will wait for 2 seconds for the return of the signal,
otherwise, the radio resumes scanning.
The
flashes during the Setting mode. Press channel/scan
or
to select
or
is shown on the display
when Keylock on is selected to on.
VOX
KEYLOCK ON/OFF
VOX
'oF'
TX
VOX
is the automatic transmitting function by inputting voice
into the optional
headset mic without pressing the
button.
Press
two times momentarily in Stand By mode to enter
Sensitivity mode.
The current selected
setting will flash on the
display.
Press channel/scan
or
to adjust the
sensitivity. 1
is the highest sensitivity and 4 is the lowest sensitivity.
can be turned off by selecting
. The
icon is shown on
the display when
is selected to on.
The
icon blinks when the voice level is of a level where it
is possible to transmit at the current selected
sensitivity
level.
Press
two times momentarily to confirm the selected
setting and exit to standby.
Press
three times momentarily in Stand By mode to enter
Keylock mode.
To exit Keylock on mode, press and hold
to turn the unit
off and then turn on again.
VOX
VOX
VOX
VOX
VOX
VOX
VOX
'on' 'oF'.
UH039P
CTCSS
channel indicator
Press
to confirm the selected setting.
'
'
' '
9
PTT
While in Keylock on mode, the UH039P will still
receive transmissions.
