18
UNIDEN UH750
Handheld UHF-CB Transceiver
Operation
Programming Scan Channels
1. Select which Scanning Mode you wish to use OS or GS Mode.
NOTE
OS is indicated by the absence of the GS icon.
2. Select the channel you want to store by pressing
or
.
3. Press and hold
mem
for 1.5 secs. to store.
MEM
icon appears and
two short tone beeps are heard.
4. To remove the channels from Memory, press and hold
mem
for 1.5
secs. once more. Two short tone beeps are heard and the
MEM
icon
disappears.
Priority Channel
The Priority Channel feature allows the user to monitor one channel in
the UH750, monitoring it every 1.5 secs. during Group Scanning.
Choosing a Priority Channel
The starting channel, when Group Scanning is
initiated, is always the Priority Channel. To change
the priority channel setting while scanning,
(eg. PRI Channel is CH17 (476.825 MHz ));
a. press
, to select a higher channel
(scanning pauses).
or
b. press
, to select a lower channel
(scanning pauses).
Drop-out Delay
While scanning, the UH750 stops at a busy channel and receives a
signal. When the received signal is over, the unit will wait for 3 seconds
for the return of the signal, otherwise, the radio resumes scanning.
