45
UNIDEN UH9050
UHF CB Transceiver
Operation - Special Features
Tone Calling (Making a Selcall Call)
Tone Calling allows you to selectively call other radios.
For convenience, the Selcall ID of the radio you are going to call should be in the Selcall
ID memory (see Storing Selcall IDs of other users to the ID Memory p.44).
If not then the Selcall ID can be manually entered for this call.
To Call:
1. Select the channel that you and your group agreed to use for Selective Calling.
2. Press
[S]
on the speaker MIC.
A beep tone will sound and the last stored ID or last transmitted ID will be
displayed.
3. Press
/
channel selector to select the desired Selcall ID.
If the desired Selcall ID is not stored in the ID memory you can manually enter the ID as
follows;
a) Press
[SCAN]
to begin ID edit. The 5th digit of the ID flashes.
b)
Use or to shift between digits. A 6th digit (for 6 tone Selcall) is available
and indicated by a ‘_’.
c)
Press the
/
channel selector to select the desired ID.
4. Press
[S]
to transmit the Selcall.
CAL will display when transmitting the Selcall.
An acknowledge tone coming from the called radio will be received if you have
successfully made contact. The acknowledge tone for the UH9050 is a succession of
three low tone beeps.
