7.4 Disconnecting a call
NOTE : You cannot disconnect existing calls by pressing the LINE1 or LINE2 key
• Unlike the speakerphone button, LINE1 key and LINE2 key are only used for off hook or
switching lines.
7.4.1 Disconnecting when a single line is in use:
• If you wish to disconnect a call simply hang up the handset.
• If you are using the speakerphone, simply press the speakerphone button.
Note:
While you are talking through the speakerphone with the handset off the hook,
pressing the speakerphone button will let you switch to the handset.
7.4.2 Disconnecting when a Multiple lines are in use:
Depending on the situation, there are different ways to disconnect a call when multiple lines are in
use.
1) Disconnecting a call using the handset
:
If you are on Line 1 and you receive a call on Line 2, answer Line 2 by switching lines.
Line 1 will automatically be placed on hold.
If you wish to disconnect Line 2, either press the hook switch or return the handset to
the handset cradle. If you disconnect Line 2 by pressing the hook switch, you will
automatically be reconnected to Line 1.
If you disconnected Line 2 by returning the handset to the handset cradle, you will be
reconnected to Line 1when you pick up the handset. Should you forget to pick up the handset,
this phone will remind you that Line 1 is on hold.
If after answering Line 2, Line 2 disconnects the call before you do, disconnect
Line 2 by using the handset or hook switch. If you do not disconnect Line 2 before reconnecting
to Line 1, the phone will automatically disconnect Line 2 after several seconds.
(
Note
: If you choose to have all lines available immediately, disconnect Line 2 using the
handset or hook switch before reconnecting to Line 1.)
If, when you are on Line 1, Line 2 is on hold and you wish to disconnect Line 2, switch to
Line 2. Doing so will activate Line 2 and place Line 1 on hold automatically. To disconnect
Line 2, either press the hook switch or return the handset to the cradle.
If you disconnect Line 2 by pressing the hook switch, you will automatically be reconnected to
Line 1. If you disconnect Line 2 by placing the handset in the cradle, you will be reconnected to
Line 1 when you pick up the handset. Should you forget to pickup the handset, the phone will
remind you that a call is on hold.
Page 15
