How It Works
14
Table 5 - Normal mode status messages
Message
Meaning
GPS Data OK The radio is receiving valid GPS data.
Check GPS
The radio is not receiving valid GPS data: check the GPS status screen and
the GPS connection.
Input Position The radio has been unable to receive valid GPS data for at least four hours;
it can no longer track your position. You need to manually input your position
(see
Setting the GPS position manually
on page 22).
Battery Low
The battery voltage output is too low (below 10 VDC).
Battery High
The battery voltage output is too high (above 17 VDC).
Using the radio in normal mode
•
To transmit, press and hold
PUSH TO TALK
on the microphone. Release the button
when you are finished talking.
•
For the best sound quality, hold the microphone about two inches from your mouth
while you’re talking.
•
Press
CHANNEL UP
on the radio or the microphone to move up one channel at a time.
Press and hold either button to scroll quickly up the channels.
•
Press
CHANNEL DOWN
on the radio or the microphone to move down one channel at a
time. Press and hold either button to scroll quickly down the channels.
•
To change the transmit power, press and hold the
ENT-1W/25W
for two seconds. The
transmit power switches between 1 watt and 25 watts each time you press and hold
ENT-1W/25W.
