17
How It Works
Scan mode with Triple and Dual Watch
If you activate Triple Watch while
operating in scan mode, the radio
checks channels 16 and 67 every two
seconds, then goes on to scan the
next channel; with Dual Watch turned
on, the radio only checks channel 16.
Press and hold
16/67-TRI
(on the radio or the
microphone) for two seconds to turn Triple/
Dual Watch on or off. (To change between
Triple or Dual Watch, see page 18.) Press
and hold the
CLR-SCAN
key to turn off Scan
mode and set the radio to Triple/Dual Watch
mode.
•
To activate scan mode, press and hold
CLR-SCAN
. Press and hold
CLR-SCAN
again to
return to the previous mode.
•
When the radio automatically stops on a channel, press
CHANNEL UP
to leave that
channel and resume scanning.
•
To end the scan, press the microphone’s
PUSH TO TALK, CALL-MENU,
or
WX-MEM
buttons.
The radio remains on the last scanned channel.
67 16
Every 2 seconds,
the radio checks
channels 67 & 16
then goes on to
the next channel.
with Triple Watch on
Memory Channel Scan
08
25
24
17
15
14
13
12
11
10
20
Reversed 16 & 67
UJ-SW 20061215 #17
