9
•
In “high-risk” locations, have multiple cameras point in the same area. This
provides camera redundancy if a vandal attempts to damage the camera.
Installing the Cameras
Note: The following installation instructions refer to the cameras included with the
UNVR package. If installing another manufacturer’s camera, refer to installation
instructions included with that camera.
1.
Mount the camera(s) to the desired surface using the parts in the supplied
mounting kit. Choose a firm mounting surface. If mounting in drywall, use the
drywall anchors supplied in the kit.
2.
Adjust the camera stand to ensure that the camera has a satisfactory view
of the area you would like to monitor. Stand configuration depends on
the mounting surface you have chosen (see below for suggested stand
configurations).
Table Mount
Wall Mount
Ceiling Mount
Camera Mounting Options
Note: Camera may not be exactly as shown.
Adjusting the Camera View Angle
The camera has several adjustment points to provide maximum flexibility when
setting the view angle. To make the adjustments, use the hex key included with the
Camera Mounting Kit.
Camera View Angle Adjustments
