23
Device
Setting Screen
Note: Set the correct date and time to ensure correct time stamping of recorded video.
Device Info
Set parameters or get information for the following:
• Device Name - Specify a name for the NVR.
• Device Number - Assign a number to the device.
•
Record Replace
- Enable record overwrite.
• Record Time (Hour) - Set the time for a recording.
• Sub Stream Record - Enable recording of both high and low resolution video.
•
Panel Version - NA
• RS485 - Choose between keyboard, PTZ, or 485 PelcoD.
• Device Serial No. - Shows the serial number assigned to the NVR.
• Channel Number - Device channel capacity (8 or 16).
• HDD Number - The number assigned to the hard disk drive.
•
Alarm Input Number - Number slot where the input from an alarm device connects
to the NVR rear panel.
•
Alarm Output Number - Number lot where the output for an alarm device connects
to the NVR rear panel.
• Video Format - Choose between NTSC or PAL.
• Stream Type - Choose the resolution of the video stream.
• Protocol - Choose between 18, 18S, 18S Plug and Play, Onvif.
• Device Time - Set the NVR time and date.
• Audio Output - Choose between Normal or HDMI.
