43
43
7.3 Decoding Rolling
If
Decoding Rolling
needs to be set up for a certain decoder,
the decoder must be selected for
Roll Screen
when you are
setting up the TV wall scheme (as explained in 6.3). The roll
group needs to be set during the TV wall setup.
Once the roll group and roll screen have been set for the
scheme, click on the button below in the interface to
start/pause the roll. Click the button while rolling to stop
the roll.
Note: The roll control buttons only work for roll decoders and can’t control other
channels.
7.4 Preview Function Overview
On the
Preview
tab of the
Decoder
screen, you will find a row
of function buttons:
The
buttons are roll screen control buttons.
• The button will manually switch to the previous group.
• The button will manually switch to the next group.
• The button will open/pause the roll screen.
• The button will stop the roll screen.
• The buttons are split screen switch control
buttons. These buttons can be used to switch the number
of split screens into 1, 4, 9, 16, 36 or 64 screens.
• The button is used to open and close full screen.
• The button is used to control the decoder.
• The buttons are the channel clear buttons.
