60
Programming/Editing Optional Settings
2. Press and hold down
then rotate the scroll
control once to select the next letter.
3. Repeat Steps 1 and 2 until you have entered the
channel name. Then press
E
or press down on the
scroll control to accept the setting.
Hints:
• Each channel name can be up to 16 characters.
Abbreviate as necessary to fit.
• The channel name appears on the second line of the
display when the scanner stops on a channel.
• If you do not enter a channel name, the scanner
displays the frequency when it stops on a channel.
• Press twice to delete the current character.
• Press three times to clear the entire alpha tag.
• Channel names take up extra memory. To maximize
channels, use channel names only where necessary.
Setting Channel Priority
program system
E
Select the system
E
Edit Group
E
Select the group
E
Edit Channel
E
Select the channel
E
Set Priority
E
This setting controls whether the scanner treats the
channel as a priority channel while scanning. Select your
setting, then press
E
.
On
- when you turn on the Priority feature, the channel will
be scanned every 2 seconds.
P
appears at the end of the
default name.
Off
- the channel will not be treated with priority.
Note: The default setting is
Off
.
Func
Menu
SC230 Paper OM 062206.fm Page 60 Friday, July 21, 2006 7:39 PM