![background image](http://html1.mh-extra.com/html/uniden/vg-100/vg-100_owners-manual_3780372043.webp)
43
•
Make a toll bypass call (explained in the Toll Bypass section)
•
Listen to and/or delete VG-100 TAM recorded voice messages
•
Change the outgoing message
•
Access the VoIP service voicemail (when calling from PSTN)
Your pin code can be between 4 and 8 digits.
Toll Bypass
Once authenticated (as explained in the Remote IVR Access section), you can make a call
on the other network. This is referred to as toll bypass. For example, you can call in on the
VoIP network and make a PSTN call or you can call in on the PSTN line and make a VoIP
call.
In order to make a call, simply enter the desired number or speed dial number followed by
the ‘*’ key and you call will be placed.
If you call in via PSTN and make a VoIP Toll Bypass call, you can terminate the call by
pressing ‘##” (for quick termination) or simply hang up. If you call in via the VoIP network
and make a PSTN Toll Bypass call, you can terminate the call by ending the VoIP session.
Summary of Contents for VG-100
