Basic Operation
14
Basic Operation
Turning the Microphone On and Off
Hold down
POWER/VOLUME
for about 2 seconds. If the
main radio is turned on, the channel that appears on the
microphone is the channel currently selected on the main
radio. Hold down
POWER/VOLUME
for about 2 seconds
again to turn off the microphone.
Setting the Base/Microphone ID
You must set the microphone ID to the same setting as
your radio’s base ID so the microphone and radio can
communicate with each other. If you set the ID correctly,
you see similar information on both the radio’s and
microphone’s display.
1.
To set the base or microphone ID briefly press
MENU
,
repeatedly press
or
until
LOCAL MENU
appears,
then press
SELECT/SCRAM
.
2.
Repeatedly press
or
until
ID SETTING
appears,
then press
SELECT/SCRAM
.
3.
Repeatedly press
or
to select the ID you want to set
(BASE ID or HANDSET ID). Then press
SELECT/SCRAM
.
4.
Repeatedly press
or
to select the ID you want
(00-99 for BASE ID or 1-4 for HANDSET ID). Then
press
SELECT/SCRAM
.
Adjusting the Volume and Squelch
Briefly press
POWER/VOLUME
, then repeatedly press
to turn up the volume or
to turn it down. Briefly press
POWER/VOLUME
to turn off volume mode.
To adjust the squelch, briefly press
SQUELCH/BATTERY
,
then repeatedly press
to turn up the squelch or
to
turn it down. Briefly press
PTT
,
16/9/TRIPLE WATCH
, or
DISTRESS
to turn off squelch mode.
Checking the Battery Level
Hold down
SQUELCH/BATTERY
for about 2 seconds. A
number from 0-4 (0 is low, and 4 is full) appears showing
the battery level. If 0 appears, the radio does not have
enough battery power to operate. Briefly press any key to
turn off battery mode.
Basic Operation
