Basic Operation
16
Using Channel Scan
Hold down
STEP/SCAN
for about 2 seconds. The radio
scans all channels stored using the memory feature,
starting with the lowest channel number to the highest.
The channel numbers appear on the display.
Notes:
•
TRI
appears and the radio activates Triple Watch
when channel scan is active. During channel scan, the
radio automatically checks Channel 16 and Channel 9
every two seconds.
•
Hold down
16/9/TRIPLE WATCH
to take the radio out
of Triple Watch mode. The radio continues to scan.
Saving Channels to Memory
Briefly press
MEM/UIC
. The displayed channel is saved to
the radio’s memory. Once a channel has been programmed
into memory,
MEM
appears on the display each time the
channel number appears. You can store any channel
except a weather channel into the radio’s memory. Briefly
press
MEM/UIC
again to remove the channel from memory.
Deleting Channels From Memory
Tune the channel you want to delete then briefly press
MEM/UIC
.
MEM
disappears.
Changing UIC Mode
Hold down
MEM/UIC
for about 2 seconds. The currently-
set UIC (
USA
,
INT
, and
CAN
) appears as you press
MEM/UIC
.
Selecting Menu Items
Briefly press
SELECT/SCRAM
to select menu items.
Displaying Time/Position/Course Info
Briefly press
SELECT/SCRAM
while a channel number
appears to display the following.
•
Current Local Time
•
Current Position (Latitude/Longitude)
•
SOG (Current Speed Over Ground)
•
COG (Current Course Over Ground)
Briefly press
SELECT/SCRAM
again to turn off display
mode. The current channel name appears.
