4
Registering to a Base
The accessory handset won't work until you register it to a base!
Compatible Bases
This handset is designed for use with Uniden's XDECT 7015 and XDECT 7055 bases.
Other Uniden XDECT bases might be compatible with this handset. For the most up-
to-date list of which bases this handset is compatible with, see our website.
Registration Methods
There are three different registration methods, but it's easy to figure out which one
applies to your handset and base. Answer the two questions to register the handset
to one of the compatible bases.
Does the handset fit in the base cradle?
Yes
Place the handset in the base. The display should say
Handset Registering
.
No
Does the base have an LCD display?
Yes
On the base, open the menu and select
1.
Register Handset
. The
display should say
Handset Registering
.
On the handset, press and hold
2.
HASH (#)
until the handset display
says
Handset Registering (
about 2 seconds).
No
Disconnect the base AC adapter.
1.
On the base, press and hold
2.
FInD
while you reconnect the adapter.
On the handset, press and hold
3.
HASH (#)
until the display says
Handset Registering
(about 2 seconds).
After about 30 seconds, the handset display should say
Registration Complete
.
Test the connection
Pick up the handset and press
TAlk ( )/FlASH
. Make sure you get a dial tone.
(Press
EnD ( )
to hang up.)
If...
Try...
you don't hear a dial tone
-
the display says
-
Registration Failed
Making sure the handset is fully
charged, then trying again.
