5
Installing the Beltclip
Line up the holes on each side of the handset.
To attach the belt clip;
Insert into the holes on each side of the
handset. Press down until it clicks.
To remove the belt clip;
Pull either side of the belt clip to release
the tabs from the holes.
Place the handset in the charger with the display facing forward.
The display on the handset should turn on.
If...
the handset display
does not turn on
- Checking the AC adaptor connection.
- Seeing if the outlet is controlled by a
wall switch.
Charge the handset completely (about 16 hours)
before using it.
Try...
6)
