7
Resetting the Handset
If you are having trouble with a handset or if you want to replace
one, you need to clear the registration information from the base
and the handset:
Do you have the base the handset is registered to?
Yes
No
Press & hold
END
and
#
until the
System Reset
menu appears (about
5 seconds).
1.
Select
Deregister HS
. The display
lists all registered handsets.
2.
Select the handset you want to reset.
3.
When the phone asks you to confirm,
select
Yes
. The handset clears its
information from the base & deletes
it own link to the base.
4.
Press & hold
END
and
#
until
the
System Reset
menu
appears (about 5 seconds).
1.
Select
Base Unavailable
.
2.
When the phone asks you
to confirm, select
Yes
. The
handset deletes its own link
without contacting the base.
3.
When you reset a handset (or if you buy a new one), that handset
displays a
Handset Not Registered
message. If you see this
message on a handset, you need to register it to a base before you
can use it.
Test the connection
Pick up the handset and press
TALK/FLASH
. Make sure you get a
dial tone. (Press
END
to hang up.)
If...
Try...
- you don't hear a dial tone
- the display says
Registration failed
Making sure the handset is fully
charged, then trying again.
