6
If..
Try..
•
you don’t hear a dial tone
•
the display shows
Registration Failed
Making sure the handset is fully
charged, before trying again.
Test the Connection
Pick up the handset and press
TALK/FLASH
. Make sure you get a dial
tone. (Press
END
to hang up.)
RESETTING THE HANDSET
If you are having trouble with a handset or if you want to replace one, you
need to clear the registration information from the base and the handset:
Do you have the base the HS is registered to?
Yes
No
1. Press & hold
END
and
#
until
the
System Reset
menu
appears (about 5 seconds).
2. Select
Deregister HS
. The
display lists all registered
handsets.
3. Select the HS you want to
reset.
4. When the phone asks you to
confirm, select
Yes
. The HS
clears its information from the
base & deletes its own link to
the base.
1. Press & hold
END
and
#
until
the
System Reset
menu
appears (about 5 seconds).
2. Select
Base Unavailable
.
3. When the phone asks you
to confirm, select
Yes
. The
handset deletes its own link
without contacting the base.
When you reset a handset (or if you buy a new one), that handset
displays a
Handset Not Registered
message. If you see this message
on a handset, you need to register it to a base before you can use it.
