21
Close the menu
On the handset, press
END
; on the base, press
MUTE/
EXIT
.
(If you open the menu during a call, press
BaCK
to back
out of the menu without hanging up.)
The next several pages list all the available menu options and how to
use them. Most of the menus are the same for the base and cordless
handsets; any option that is available only for the base or handset is
noted in the description.
The
Handset
and
Base Setup
Menu
When you open the menu on a handset, this menu is called
Handset
Setup
. On the base, this menu is called
Base Setup
. Each of these
options can be set separately for each station. (A station can be any
cordless handset or the base.)
Menu option:
Use it to:
T-coil
(Handset only) Turn on T-coil mode to reduce noise on
some hearing aids (see "Do you use a T-coil hearing
aid?" on page 48).
Alarm Setting
(Handset only) Set alarms on your handset (see "Using
the Alarm Feature" on page 38).
Primary Line
Select the line you want this station to use as the default
line when you make a call (see "Assigning a primary
line" on page 20). Do not change this setting if you are
using only one line.
Ringer Tones
(Handset only) See the ring tones the handset is using
as the main ring tone for each line. To change the tone,
select the line, then choose a ring tone from the list. (As
you highlight each ring tone, the phone plays a sample
of the tone. When you hear the tone you want, press
OK
.)
Personal Ring
(Handset only) Turn on the personal ring feature. If you
have Caller ID, this feature lets you assign special ring
tones to anyone in your phonebook: this handset will
use the special ring tone when that person calls.
