49
Resetting and Registering Handsets
If you are having trouble with a cordless handset or if you want to
replace one, you need to clear the registration information from the
base and the handset:
Do you have the base the handset is registered to?
Yes
No
Press and hold
1.
END
and
#
until the
System Reset
menu appears (about 5
seconds).
Select
2.
Deregister HS.
The display
lists all registered handsets.
Select the handset you want to reset.
3.
When the handset asks you to confirm,
4.
select
Yes
. (It may ask you twice, just
to be sure.) The handset clears its
information from the base and deletes
its own link to the base.
Press and hold
1.
END
and
#
until the
System Reset
menu appears (about 5
seconds).
Select
2.
Base Unavailable
.
When the handset asks you
3.
to confirm, select
Yes
. (It
may ask you twice, just to be
sure.) The handset deletes its
own link without contacting
the base.
When you reset a handset (or if you buy a new one), that handset
displays a
Handset Not Registered
message. If you see this message
on a handset, you need to register it to a base before you can use it.
Registering a handset
Does the handset fit in the base cradle?
Yes
No
Place the
handset in
the base. The
display should
say
Handset
Registering
.
On the base, open the menu and select
1.
Register
Handset
.
On the handset you want to register, press and hold
2.
#
until the display says
Handset Registering (
about
2 seconds).
In about 30 seconds, the handset display should say
Registration
Complete
. Press
TAlk/FlAsH
and make sure you get a dial tone.
If...
Try...
you don't hear a dial tone
-
the display says
-
Registration Failed
Making sure the handset is fully
charged, then start over at step 1.
To register a handset to a different base, see the section "Expanding
Your Phone" in the owner's manual for the other base.
