1.1 P Eco Mode
This Led signals a short circuit at the speaker output, overheating, overload
or an internal problem of the amplifier.
In addition this LED will light up if corresponding amplifier channel is in ECO
mode.
1.2 Clip
This LED will light up if amp clips and limiter function is activated.
Permanent clipping can lead to a defect of the amplifier or the connected
speakers!
1.3 Input Signal
This LED shows that an input signal is present.
1.4 Output Signal
LED lights up if an output signal is present.
2 Power Switch
To switch unit on or off.
3 Power Connector
Connect the power cord included here.