background image

 

8          

888-994-7636

 

 

 

Warranty Policies con’t 

 
STORAGE CHARGES 

Randell  makes  every  effort  to  consistently  meet  our  customer’s  shipment 
expectations.    If  after  the  equipment  has  been  fabricated,  the  customer 
requests delay in shipment, and warehousing is required: 
 

1.  Equipment  held for  shipment  at  purchasers  request  for  a  period  of  30 

days  beyond  original  delivery  date  specified  will  be  invoiced  and 
become immediately payable. 

2.  Equipment  held  beyond  30  days  after  the  original  delivery  date 

specified will also include storage charges. 

 

SHIPPING & DELIVERY 

Randell  will  attempt  to  comply  with  any  shipping,  routing  or  carrier  request 
designated  by  dealer,  but  reserves  the  right  to  ship  merchandise  via  any 
responsible  carrier  at  the  time  equipment  is  ready  for  shipment.    Randell  will 
not  be  held  responsible  for  any  carrier  rate  differences;  rate  differences  are 
entirely  between  the  carrier  and  purchaser.    Point  of  shipping  shall  be 
determined  by  Randell  (Weidman,  MI/Tucson,  AZ/Jackson,  MS

).    At  dealer’s 

request, 

Randell  will  endeavor  whenever  practical  to  meet  dealer’s  request.  

Freight charges to be collect unless otherwise noted. 
 

DAMAGES 

All  crating  conforms  to  general  motor  carrier  specifications.    To  avoid 
concealed  damage,  we  recommend  inspection  of  every  carton  upon  receipt.  
In  the  event  the  item  shows  rough  handling  or  visible  damage  to  minimize 
liability, a full inspection is necessary upon arrival.  Appearance of damage will 
require removing the crate in the presence of the driver.  

A notation must be 

placed on the freight bill and signed for by the truck driver at the time of 
delivery.   

  Any  and  all  freight  damage  that  occurs  to  a  Randell  piece  of 

equipment as a result of carrier handling is not considered under warranty, and 
is not covered under warranty guidelines.  Any freight damage incurred during 
shipping  needs  to  have  a  freight  claim  filed  by  the  receiver  with  the  shipping 
carrier.    Consignee  is  responsible  for  filing  of  freight  claims  when  a  clear 
delivery  receipt  is  signed.    Claims  for  damages  must  be  filed  immediately 
(within  10  days)  by  the  consignee  with  the  freight  carrier  and  all  cartons  and 
merchandise must be retained for inspection. 
 
 
 
 
 
 
 
 
 

 
 

Summary of Contents for Randell 2127AC
























Reviews: