18
POSITIONING THE UNIT – WORKING SPACE
This unit is designed and built for outdoor installation with free airflow to the condenser coils. The unit can be
installed in a semi-closed position if the ventilation system is efficient enough to maintain temperatures below
the values given in the section on Function Limits.
The fan intake airflow through the condenser coils must not be obstructed in order not to compromise the
efficiency of the unit and to prevent the unit being stopped by the safety devices. In any case the safety
regulations of the installation must be respected, as well as the minimum access distances shown in the
diagram below. It is also recommended that the unit is protected from the wind by positioning so that the coils
are parallel to the direction of the prevailing wind.
It is recommended that the unit is protected from rain, snow, water falling from gutters, etc.
Do not install the unit near the sea (minimum recommended distance 200m) or near sulphur springs. If the
installation location is particularly harsh, contact the Uniflair Sales dept. for possible technical solutions.
The optional rubber feet reduce the transmission of vibrations to the floor.
Summary of Contents for Aquaflair 00152
Page 47: ...47...
