UNIFLEX-Hydraulik - 14 - www.uniflex.de
Connecting the electric supply
Caution:
This work should only be performed by a qualified electrician! Note the marked voltage on the
type plate and select the appropriate electric circuit diagram!
Works on live wires are hazardous!
Switch the main connection of the hose crimper off-circuit and make sure that it cannot be switched on
again.
Connect the electric connecting cable to the connection of the power supply. For the correct voltage refer
to the type plate
Note:
The rotating direction of the electric motor is indicated by an arrow on the motor!
Note:
The connecting plug must comply to current local electrical regulations!
Checking the rotating direction of the electric motor (only with 3-Phases)
If the motor does not rotate in the direction indicated by the arrow, two phases must be switched as
shown:
Attention:
The motor will be damaged if it rotates in the wrong direction for some time.