background image

MiCard MultiTech4 

 

 

 

31 

 

8.1

 

Supported transponder types 

MiCard MultiTech4-P: 

13.56 MHz: 

Calypso,  CEPAS  CAN,  CTS  CSN,  CTS  Special  Sectors, 
EM4x33,  EM4x35,  eTag  CSN,  Futitsu  (MB89R118C, 
MB89R119C,  MB89R112),  HID  iCLASS®  CSN,  ICODE® 
DNA  CSN,  ICODE®  SLI  CSN,  ICODE®  SLI  Memory, 
Infineon  my-d™  CSN,  ISO  14443A  CSN,  ISO  14443B 
CSN, ISO 15693 CSN, I-tag CSN, Izly, LEGIC Advant CSN 
(ISO 15693, 14443A), MIFARE® Classic (Standard, EV1) 
Blocks,  MIFARE®  Classic  (Standard,  EV1)  CSN, 
MIFARE®  DESFire®  (Standard,  EV1,  EV2)  CSN, 
MIFARE®  DESFire®  (Standard,  EV1,  EV2)  Memory, 
MIFARE® Plus CSN, MIFARE® Plus Memory incl. SL 0-3, 
MIFARE®  Pro  X,  MIFARE®  Smart  MX  (CSN),  MIFARE® 
Ultralight®  (Standard,  EV1,  C)  CSN,  MIFARE® 
Ultralight®  (Standard,  EV1,  C)  Memory,  Moneo,  NFC 
Host  Card  Emulation,  NFC  Peer  to  Peer  (P2P),  NFC 
Type  1  CSN,  NFC  Type  2  CSN,  NFC  Type  3  CSN,  NFC 
Type 4 CSN, NTAG 2XX, Oyster CSN, PayPass CSN, Pico 
Pass  CSN,  SLE44R35,  SLE66Rxx  (my-d  move),  Sony 
FeliCa  CSN,  Sony  FeliCa  Special  Blocks,  SRF55Vxx 
(my-d  vicinity),  SRI4K,  SRIX4K  CSN,  SRI4K,  SRIX4K 
Memory,  SRI512,  SRT512  CSN,  SRI512,  SRT512 
Memory,  ST  (ST,  ST  LRI1k,  ST  LRI2k,  ST  LRIS2k,  ST 
LRIS64k,  ST  M24LR64-R,  ST  M24LR04E-R,  ST 
M24LR16E-R),  Texas  Instruments Tag-It  CSN,  Texas 
Instruments Tag-It Memory, Topaz 

125 kHz, 134.2 kHz: 

AWID,  Bosch  ReadykeyPRO®  UID,  Cardax  UID, 
CASI-RUSCO®, Cotag, Deister UID, EM 400x, EM 4050, 
EM 410x (4100, 4102, 4105), EM 4150, EM 4200, EM 
4305,  EM  4450,  EM  4550,  Farpointe  Data  Pyramid, 
Farpointe  Data  Pyramid  UID,  GProx™  II  UID,  HID® 
Prox,  Hitag  1,  Hitag  2,  Hitag  S,  Honeywell  Nexwatch, 
ICT,  ID  TECK  Alternate  (128  bits),  ID  TECK  UID  (64 
bits),  Indala®  26  bit /  40134  (Motorola),  Indala®  ASP 
UID, Indala® ASP+ UID, Indala® ECR, ioProx, ISONAS™, 
ISO  FDX-B/4105,  Kantech  ioProx™,  Keri  KC-10x  UID, 
Keri KC-26x, Keri NXT UID, NEDAP Prox, PAC, Paradox, 
Rosslare,  T5557,  T5567,  TIRIS/HDX,  UltraProx, 
UNIQUE, ZOODIAC 

MiCard MultiTech4-PI: 

All  MiCard  MultiTech4-P  transponder  types  and  the 

Summary of Contents for MiCard MultiTech4



















































Reviews: