6
microMIND V2 - Installation Guide
2.2
Scope of supply
The microMIND V2 package includes
the microMIND V2 device
a patch cable to connect the device to a printer
Power supply (if no PoE microMIND V2)
the microMIND V2 Installation Guide
2 strips of Velcro®
2.3
Technical Specifications
Power Supply:
The microMIND V2 is available in two different versions. One
with PoE (Power over Ethernet) and one without. If you have a
microMIND V2 which does not support PoE or if your network
switch does not support PoE, you have to use the respective
power supply.
The power supply must be a limited power source (LPS), which
delivers a voltage of 12 V DC and a min. current of 450 mA. A
polarized plug 2.1/5.5 mm is to be used, with positive wire to the
inner jack.
Rated Voltage:
12 V
LPS, max. 450 mA
Ethernet:
2x RJ-45 Ethernet connection with a built in 10/100MBit switch
USB:
USB Type A connection with USB 1.1 (Full-Speed) to connect a
MiCard (V2) reader
D-SUB-15:
Digital I/O Connector to lock / unlock the machine for copy
accounting.
Ambient
temperature:
0
+40 °C (32
+104 °F)
Printer:
Any printer with or without a respective network interface can be
connected to the uniFLOW Server. Printers without network
connections, such as USB or LPT connections, can also be
"virtually" attached to the microMIND V2 via the uniFLOW
Server.
Supported Readers:
MiCard (V1) and MiCard V2
