Other settings and functions
185
Door opener
Activating the Door opener
Prerequisite
: Door opener has been enabled by your administrator.
At first you have to set up a programmable key to open a door.
See also at
page 95 that explains how to set up a local feature.
Long press the Function key in the left panel or hold down the Function key on
a connected OpenScape Key Module 600 to which you want to assign the
DoorOpener function, until the programming prompt is displayed.
or
@
Press Main Menu key, if needed.
Open using the Softkey.
Select desired page (1 to 2).
Press and hold the Function key to which you want to assign the door.
€
Select "Assign local feature"
Confirm.
Confirm.
Confirm. The key is programmed.
LED displays for door opener keys
Opening the door without receiving a call
Prerequisite
: The functionality has to be enabled by your administrator.
When you have configured a programmable key to open the door, you can press
the relevant key to open the door for your visitor without receiving a call from the
door phone.
Press the Function key in the left panel or on a connected OpenScape Key Mod-
ule 600 to which the Door opener function has been assigned.
_
Favorites
_
Favorites (1/2)
Page 1
Q
_
_
Assign local feature
-
_
Door opener
-
_
DoorOpener
1
Q
_
LED
Meaning
_
LED off:
The door opener is in idle mode.
¤
LED lights green:
Door opened
¤
LED lights orange:
In progress.
¤
LED lights red:
Failure, contact your administrator if the problem per-
sists.
DoorOpener 1
_
Summary of Contents for OpenScape CP700
Page 1: ...OpenScape Desk Phone CP700 CP700 OpenScape 4000 User Guide HFA A31003 C1000 U128 1 7619...
Page 48: ...48 Operating your OpenScape Desk Phone CP700 CP700X...
Page 53: ...Operating your OpenScape Desk Phone CP700 CP700X 53...
Page 71: ...Operating your OpenScape Desk Phone CP700 CP700X 71 Save your new settings...
