124
Using Bluetooth
Connect/disconnect the conference device with
OpenScape CP700
The conference phone must still be connected to the OpenScape CP700/700X.
If you want to subsequently use the conference phone at another location, for
example, you should first disconnect it from the OpenScape CP700/700X.
€
Select the conference device from the list of paired devices.
Confirm with the Softkey to connect. The connection is immediately established
and the conference phone is ready for use.
or
Confirm with the Softkey to disconnect. You will receive a corresponding confir-
mation.
^
Exit the menu if appropriate.
Testing the Bluetooth conference phone
Answering a call
Prerequisite:
The conference device is ready for operation and the OpenScape
CP700 is in idle mode.
Both the phone and the "conference device" ring. The caller is displayed. To an-
swer the call, you can now:
:
Press key.
or
Press the Softkey
shown.
or
Press the On/Off key on the "conference device".
You are connected with the other party. The "conference device" is switched on.
You can now, for example, initiate a consultation call or accept a second call to
set up a conference.
Calling a participant
Prerequisite:
The conference phone is ready for use but
switched off
. The
OpenScape CP700 is in idle mode.
:
Press key.
or
j
Enter the phone number. The "conference device" switches on automatically.
Once the subscriber answers, you can set up a conference via a consultation or
second call.
?
Multiconference
-Žˆ
¦_
?
Multiconference
-Šš
¢_
entgegennehmen
O
_
Summary of Contents for OpenScape CP700
Page 1: ...OpenScape Desk Phone CP700 CP700 OpenScape 4000 User Guide HFA A31003 C1000 U128 1 7619...
Page 48: ...48 Operating your OpenScape Desk Phone CP700 CP700X...
Page 53: ...Operating your OpenScape Desk Phone CP700 CP700X 53...
Page 71: ...Operating your OpenScape Desk Phone CP700 CP700X 71 Save your new settings...
