inbetriebnahme.fm
A31003-C1000-M102-5-76A9, 09/2017
OpenScape Desk Phone CP200/CP205/CP400/CP600 HFA, Administration Manual
29
Startup
Quick Start
Click
OK
to apply the changes. The new vendor class now appears in the list.
5.
Exit the window with
Close
.
Add Options to the New Vendor Class
Next, two options resp. tags will be added to the vendor class. Two passes are needed for this:
in the first pass, tag #1 with the required value "Siemens" is entered, and in the second pass,
the VLAN ID is entered as tag #2.
>
For DHCP servers on a Windows 2003 Server (pre-SP2):
Windows 2003 Server contains a bug that prevents you from using the DHCP con-
sole to create an option with the ID 1 for a user-defined vendor class. Instead, this
entry must be created with the
netsh
tool in the command line (DOS shell).
You can use the following command to configure the required option (without error
message) so that it is also appears later in the DHCP console:
netsh dhcp server add optiondef 1 "Optipoint element 001"
STRING 0 vendor=OptiIpPhone comment="Tag 001 for Optipoint"
The value
SIEMENS
for optiPoint Element 1 can then be re-assigned over the
DHCP console.
This error was corrected in Windows 2003 Server SP2.
