Administration
A31003-C1000-M102-5-76A9, 09/2017
68
OpenScape Desk Phone CP200/CP205/CP400/CP600 HFA, Administration Manual
administration.fm
System Settings
3.5
System Settings
3.5.1
System Identity
3.5.2
HFA Gateway Settings
To connect the OpenScape Desk Phone CP phone to the OpenScape System, the data de-
scribed in the following are required.
The
Gateway address
is the IP address of the communication platform resp. HFA server.
The
Gateway port
is the port used by the HFA server for signaling messages. Usually, the de-
fault value "4060" is correct.
The
Subscriber number
is used as the internal extension number of the phone. It can be 1 to
24 characters long.
To log on to the HFA server, a subscriber password must be provided. A new subscriber
pass-
word
can be entered by the administrator.
Data required
:
•
IP address
: IP address of the communication platform resp. HFA server.
•
Gateway ID
: The HFA server’s port for signaling.
Default: "4060".
•
Subscriber number
: The phone’s extension.
•
Password
: Password for logging on to the HFA server.
Optionally, a
Gateway ID
can be provided. The Gateway ID refers to the PBX/Gateway/Gate-
keeper to which the phone is connected. The value is the same as the "Globid" parameter in
the OpenScape 4000 resp. the "H.323 ID" in the OpenScape Business.
The
System type
is provided by the system the phone is connected to and therefore read-only.
Administration via WBM
System > Gateway
Gateway
System type
IP address
Gateway ID
DEFAULTH232ID
192.168.1.2
Subscriber number
101
Submit
Reset
OpenScape Business V1
Password
*****
