background image

64

More functions/services

Deleting advisory messages

:

Open the idle menu 

 Page 15.

Select and confirm the option shown.

Displaying the number of waiting calls/
overload display

You can show the number of external waiting calls on the display if you pro-
grammed a key with "View number of calls" 

 Page 49.

R

Press the "Calls in Q" key.

If the number of waiting calls exceeds a preset limit while you are conducting an-
other call (overload), the LED on the key lights up.
• LED off: There are no waiting calls.
• LED is flashing slowly: The set limit has been reached.
• LED is flashing quickly: The limit has been exceeded (overload).

Using another telephone like your own for a call

Other parties can temporarily use your phone like their own for an outgoing call.

N

Press the key shown.

Select and confirm the option shown.

Select and confirm the option shown

1

.

j

Enter the number of the other user.

j

Enter the other user's code 

 Page 60.

if nec.

If the other user has not set a PIN, he or she is prompted to do so on his or her 
phone.

j

Dial the external number. 

This state is cancelled as soon as the call is ended.

Advisory msg. off?

PIN and Authorisation?

f

*508=Temporary Phone?

1. ”Differing display view in a HiPath 4000 environment” 

 Seite 86

Change PIN?

Summary of Contents for openstage 15 T hipath 3000


































































































Reviews: