![background image](http://html.mh-extra.com/html/unify/openstage-wl-3/openstage-wl-3_user-manual_842199050.webp)
Calling
c06_WL3.fm
Outgoing Call
A31003-M2000-U107-1-7619, 1/2017
50
WL3 and WL3 Plus WLAN Handset, User Manual
6.1.2 Decline a Call
When the signal sounds, press
or the “Decline” Soft key to decline the call.
6.1.3 End a Call
A press on the End key
or the right Soft key “End” ends the call. The duration
of the call is shown in the display.
6.2 Outgoing Call
6.2.1 Pre-Dial
Enter the number and press
or the soft key “Call” to get the line. The number
is shown on the display while dialing. If needed, press “Clear” to erase the
number. By using the Navigation key, it is possible to step and add/delete a digit
in a number.
An international number can be dialed from the handset by entering a + character
followed by the country code and local number. To enter the + character, long
press the 0 key until the character is shown in the display.
6.2.2 Dial Using a Pre-Programmed Key/Button
Some keys and buttons can be programmed with a number, as described in
Press the pre-programmed key/button to dial the number. The call is
automatically connected.
6.2.3 Dial a Number from the Call List
It is also possible to dial a number from the Call list by pressing the Call key
,
selecting a number from the list, and then pressing “Call” or the Call key
.
NOTE: If the handset is configured to respond to declined calls with a message template,
the "Reply with a message template?" prompt is displayed. For additional information, see
NOTE: The + character cannot be entered and international numbers cannot de dialed this
way, if the 0 key has been configured as a hot key, see