c10_WL3.fm
Menu Operation
Calls
A31003-M2000-U107-1-7619, 1/2017
WL3 and WL3 Plus WLAN Handset, User Manual
71
9. To stop the diversion select “All calls” and unmark the check box. Press the
Soft Key “Back” until the screen turns to idle mode.
10.1.3.2 Divert Calls if No Reply
1. Enter the menu by pressing the “Menu” soft key.
2. Select “Calls”
in the menu.
3. Select “Call services”.
4. Select “Divert calls” > “Internal or External”.
5. Select “No reply” > “Edit”.
6. Enter number (maximum 24 digits) to divert to.
7. Select “OK” or “Back” > “Yes”. The check box is marked.
8. Press “Back” until the screen turns to idle mode.
The handset sends a diversion reason code to the system by establishing a
call. The call is automatically disconnected after a few seconds.
9. To stop the diversion, select “All calls” and unmark the check box. Press the
Soft Key “Back” until the screen turns to idle mode.
10.1.3.3 Divert Calls When Busy
1. Enter the menu by pressing the “Menu” soft key.
2. Select “Calls”
in the menu.
3. Select “Call services”.
4. Select “Divert calls” > Internal or External.
5. Press “When busy” > “Edit”.
6. Enter number (maximum 24 digits) to divert to.
7. Select “OK” or “Back” > “Yes”. The check box is marked.
8. Press “Back” until the screen turns to idle mode.
The handset sends a diversion reason code to the system by establishing a call.
The call is automatically disconnected after a few seconds.
9. To stop the diversion, select “All calls” and unmark the check box. Press the
Soft Key “Back” until the screen turns to idle mode.