Menu Operation
c10_WL3.fm
Messaging
A31003-M2000-U107-1-7619, 1/2017
78
WL3 and WL3 Plus WLAN Handset, User Manual
10.3.0.3 Delete Profile
1. Enter “Menu”.
2. Select “Profiles”
in the menu.
3. Select profile from the list.
4. Press “More”.
5. Select “Delete” from menu.
6. Press “Select”.
7. Press “Yes” to confirm.
10.3.0.4 Edit Profile
1. Enter “Menu”.
2. Select “Profiles”
in the menu.
3. Select profile from the list.
4. Press “More” and then select “Edit”.
5. The following options can be performed:
- Edit the required setting by marking it, and then press “Edit”.
- Add additional settings by pressing “More” and then select “Add setting” or
“Import from”.
- Remove a setting by marking it and then select “More” > “Remove setting”.
6. If needed, mark the added settings, and press “Edit” to make the changes.
10.4 Messaging
The following features are applicable to WL3 Messaging and WL3 Plus
Configuration Manual, WL3 WLAN Handset and WL3 Plus WLAN Handset.
When a text message is received, the LED starts flashing and the message alert
signal sounds. The “New message” icon
, and the content of the received
message are automatically displayed. The icon is displayed until all new
messages are opened. If the message is received during a call, a beep notifies
the user.
The handset user can reply, forward the message, call the sender, and call
number
1
included in a text. It is also possible to read the message later by
pressing “Close”. A received message is stored in the Inbox. See
