Menu Operation
c10_WL3.fm
Settings
A31003-M2000-U107-1-7619, 1/2017
90
WL3 and WL3 Plus WLAN Handset, User Manual
10.7.1.3 Set Alert for Messages
1. Press “Menu”.
2. Select “Settings”
in the menu.
3. Select “Sound & Alerts”.
4. Select “Message alert”.
5. Select between 10 different message alerts from list. By pressing “Play”, you
can listen to the different alerts.
6. Press “Back”.
TIP: By default, the message volume follows the ring volume setting, but you can
set a different message volume in the handset, see the Configuration Manual,
WL3 WLAN Handset and WL3 Plus WLAN Handset.
10.7.1.4 Turn the Vibrator on/off
1. Press “Menu”.
2. Select “Settings”
in the menu.
3. Select “Sound & Alerts”.
4. Select “Vibrating alert”.
5. Select “On”, “On if silent” (that is, the vibrator is on when the handset is
muted), or “Off”
6. Press “Back”.
10.7.1.5 Set the Key Sound
This means that every time a key is used, the handset produces a small sound.
1. Press “Menu”.
2. Select “Settings”
in the menu.
3. Select “Sound & Alerts”.
4. Select “Key sound”.
5. Select “Silent, “Click”, or “Tone”.
You can listen to the key sound by pressing “Play”.
NOTE: The “Play” soft key is not available for Enhanced beeps. Instead, send a message
to the handset to listen to the sound.
