TD 92930EN
13 December 2013 /Ver B
Configuration Manual
WL3 and WL3 Plus WLAN Handset
30
6. Handset Configuration
6.
Handset Configuration
NOTE: This section describes settings in parameter definition files (.def). These files
are regularly updated and settings can change slightly. For example "On" to
"Enable" or a parameter can be moved to another directory.
The handset requires some settings to function in the VoWiFi system. All settings are
done in the WinPDMWSG. This section describes the available settings for the
handset. The first part explains network settings and the second part explains the
handset settings.
For more information, see the WinPDM Online Help that is accessible for each
parameter by clicking the icon
in the Edit parameters view, or the Installation and
Operation Manual, OpenStage Wireless Service Gateway (WSG), TD 92442EN.
6.1
Select Network
The handset can switch between four different WLAN system configurations called
Network A, Network B, Network C, and Network D. The name can be changed (using
WinPDM or WSG) and is visible in the handset, see
6.1.2 Change Name of Network
.
A handset can be configured for up to four different WLANs but only for oneWSG and
one VoIP System.
The configured networks in WinPDM must have a SSID value to view them in the
handset.
Network A is the default system and used throughout this manual.
1
Select Network > General.
2
In the Active network drop-down list, select “Network A”.
6.1.1
Change Active Network
1
Select Network > General.
2
In the Active network drop-down list, select “Network A“, “Network B“, “Network
C“, or “Network D“.
6.1.2
Change Name of Network
The name is shown when selecting network in the handset.
1
Select Network > Network A (or B, C, or D).
2
In the Network name field, enter the name of the network.
6.1.3
Enable Switch between Networks
The handset can be configured to switch between networks on the site.
1
Find parameter Network > General > Auto-switch network, and select “Enable”.
Parameter Auto-switch network time-out appears. This parameter defines the
time before the handset tries to connect with the next included network.
2
Enter a value in seconds for parameter Auto-switch network time-out.
3
For the networks that should be included in the auto-switch network:
Find parameter Network > Network A (B, C, D) > Include in auto-switch network,
and select “Yes” to enable switch to Network A (B, C, D).
