Installation
9.
Firmware Update
You can check the firmware version loaded into the non-volatile memory of the unit.
The firmware version must match to the driver version used.
Open the
Capture Filter Properties
dialog of e.g. AmCap tool. Select
FG Properties
tab.
For verifying the firmware programmed on the UFG-05 unit please click
Check
Firmware
in the
Advanced
section of the dialog.
Open the FG Properties tab and click Check Firmware.
If firmware is OK
Press No.
If firmware does not match to the driver press
Yes
.
Please note that the firmware update will take about three minutes.
After the update is completed please restart the PC.