background image

18

  unigreen

5.3

DISTRIBUTOR ACCESSORIES

Various configurations of accessories or distributors are fitted to the outlet of
the fans. At present these are:
Polipo - Super Spalliera - RV GDC
WARNING: for all adjustments, always observe the safety indications in the
chapters relevant to maintenance and repair of this manual, as well as paragraph
2.3.1 relevant to the use of chemical products.

5.3.1 POLIPO FOR ESPALIER

Tangential flow accessory that brings the diffusers closer to the walls to treat,
for targeted and localised interventions. The vertical construction puts the
distributors parallel with the walls of the vegetation, guaranteeing a uniform
treatment with limited absorption.
Versions with 4 or 5 distributors per side are available to choose from on the
basis of the height of the row.
The height of the arms can be adjusted by hand and the distributors can be
inclined to direct the chemical product in the best way for the configuration of
the vegetation. All the adjustments are made by hand using knobs and screws.
When treating particularly wide rows (up to 4 m) OPTIONAL extendable arms
are available.
The "POLIPO" accessory is used with STD version fans.

5.3.2 SUPER SPALLIERA FOR ESPALIER

With this accessory you can treat particular espaliers with thick vegetation. It
is especially indicated where you need to pass beyond the rows, using a lot
of air and power.
The variable diffusers let you direct the product in relation to the requirements
of the vegetation. All of the adjustments are done by hand using the knobs
and screws.
The SUPER SPALLIERA accessory is used with XP fans.

5.3.3

RV BOOM FOR GDC

This boom has lateral diffusers (variable and moveable) and two top
arms with hydraulic or manual adjustment, so the jets can be
directed onto the vegetation to be treated.
In the bottom part there are two adjustable, telescopic distributors
for GDC treatment.
The height of the structure can be adjusted by hand for different
types of vegetation.
The RV-GDC accessory is used with XP fans.

SUPER SPALLIERA

POLIPO SPALLIERA

RV per GDC

Summary of Contents for TurboTeuton P300





































Reviews: