UniGuard Technology Limited
8
into 4-PIN socket, and then connect the other end to mains supply.
3.2 Car charge: Find the car lighter charger from the accessories and connect to car
cigarette lighter.
Note
: Red LED ON means being charged, and LED OFF means fully charged,
and then charging can be stopped
. If the battery can’t be fully charged once, then
unplug the charger for about 10 minutes and then charge it one more time.
III. Basic functions
Note: Please don't type "+" for all the command in this manual, "space"
means press the space button on the cell phone keyboard.
1. ON/OFF Function
1.1
In the OFF state, switch ON/OFF to ON position, then the three LED will flash 1 time, which
means the tracker has been switched on.
2. Initialization
Send SMS "begin+password" to tracker, it will reply "begin ok" and return to the
default factory settings. (Default password is: 123456). For example: Send SMS
"begin123456" to tracker, it will reply "begin ok".
3. Change Password
Send SMS "pold pspace+new password" to the tracker to
change the password. For example: Send SMS "password123456 888888" to tracker,
it will reply “password OK”, it means the password has changed successfully. And
please keep the new password in mind.
Note: The new password must be 6 digits Arabic numbers, or the tracker can't
recognize.
4. Add and Delete Authorization
4.1 Authorization phone number is the phone number you used for tracking,
controlling, receiving alarms, etc, and only 5 phone numbers to be allowed to
authorized in the tracker at most. Add authorization as following two ways:
4.2 For the first authorization, Call and track the tracker device for 10 times from cell
phone in success, it will make the cell phone number as the authorized number
automatically, and reply “add master ok”
.
