UniGuard Technology Limited
www.uniguardgps.com
P=1 is for Aalrm and listen
P=2 or 3 is the second\ the third listen number.
e.g.
A000000,003,1,136xxxxxxxx
Message replied after successful setting
：
Set Telephone OK!
After it’s set successfully, once there is an alarm happened, the
device will alert to Alarm Number and Tracking System by
message.
If you dial with one of these three numbers you set, it can be
connected automatically after the 3th rings. Then you can
listen the voice in the vehicle.
2.5 Over-Speed Alarm Setting (005)
Message format
：
A******,005,XXX
XXX=[000,200] (unit: km/h)XXX=00 is close the function.
e.g.
A000000,005,020
Message replied after successful setting:
Set Over speed (20)
KM OK!
If the vehicle is over speed you set, it will send alarm message
to Alarm Number:
20 KM/H Over speed!
2.6 Geo-Fence Setting(006)
Message format
：
A******,006,XX
XX =[00-50] (Unit:100m) .
When XX=0, e-Fence is OFF. And the maximum limited value
of XX is 50*100=5000m. e.g.
A000000,006,10
Reply:
Set Distance (1000)M OK!
When user is out of the bound region (e.g. 1020m), a prompt
