10. AC Power Cord -
Plug this cable into a standard 110V or 220V wall outlet. Be sure
that the supplied voltage in your area matches the unit's required voltage. Never
plug your power conditioner into a wall outlet that does not match its required
voltage which helps to avoid serious damage may occurred on the unit.
11. Rear resettable circuit breaker -
This reset button is used to reset the breaker.
12. 12V Lamp TNC connector -
This TNC connector is used to connect the detachable
gooseneck lamp
(
The gooseneck lamp is an optional accessory up to customer's
demand, the standard product doesn't include this lamp.).
13. Power Output -
There are totally 8 American type outlets on the rear panel.
REAR PANEL
9 total American standard outlets (8 rear panel outlets and 1 front panel unswitched outlet)
Built-in electrical noise filtering at input end
Power surge, power spikes & overvoltage protection
Total power capacity of 1800 watts
15 amps rating
Overvoltage protection device and LED warning indicator.
2 front pull out LED light pipes with variable dimmer control and separate rack lights
ON/OFF switch
Circuit breaker reset switch on rear panel
LED digital voltmeter/ammeter
Durable all-steel chassis occupies 1U rack space
TNC socket for connecting to (optional) gooseneck lamp
Page 2
FEATURES
MAXIMUM LOAD
The eight circuit breaker protected outlets are rated at 15 amps total, which is equivalent
to 1800 watts at 120 volts. If the total load exceeds 15 amps, the circuit breaker will trip,
cutting off power to your rack. If this happens, reduce the load by unplugging one or more
units from the unit, then push the circuit breaker button in to reset it.
OPERATION
~
120V
60Hz
15A
AC
IN
RESET
12V LAMP
MAX LOAD
420mA
Made in Taiwan
11
12
10
13
PC-PLUS II
