The UNG660 has an out of level alarm which comprises of a loud beeping sound and the lasers flashing. This indi
-
cates the laser is outside of self levelling range. To get into range place the laser on a more level surface. Once in
self leveling range the beeping and flashing will stop and the laser lines will be solid. The UNG660 is auto levelling so
as long as the unit is within self leveling range then the laser will accurately level, there is no need to make sure the
surface the laser is on is perfectly level.
To power up simply flick the pendulum locking switch to the on position. To power up the Horizontal 360 degree line
press the H button and to power the vertical line press the V button. You can operate on or both lines if your require.
to power off simply flich the lock switch back to off.
The UNG660 features pulse mode which allows the laser to use an OPTIONAL suitable line receiver allowing outdoor
use over a 40m range (suitable line receiver the RedBack LLR705). To enable pulse mode simply power the laser up
as normal and then press the P/Manual button on the control panel, you will see the lasers dim slightly. A suitable
laser receiver will now be able to pick up the laser line.
This laser also features manual mode. This allow the laser line to be turned on without self levelling, thus allowing
you to set the laser level on any angle you wish. This is handy for ballustrades etc. A camera style pan and tilt tripod
makes this easier to set. To enable manual mode press the bottom P/Manual mode button WITHOUT unlocking the
pendulum switch. The lasers will turn on without flashing. Note you can use the laser in manual mode and pulse at
the same time. Once in manual mode press the P/Manual Button again.
The UNG660 can be used with or witout the magnetic bracket. Note the bracket has the feature to elevate the laser
but using the locking knob on the bracket.
Warranty Information – CMI Industries Pty Ltd
The Principles behind our warranty.
•
Duration of warranty is fixed and automatic, when we advertise 1 year on a particular model, its two years. No drop down to a lesser time if you forget to register, registration is NOT
required just proof of purchase showing date. Please check your specific model for duration of warranty, see the end of this document.
•
Although the duration of our warranties are for a particular period it does not mean we will charge you for a genuine warranty failure a month or two outside that warranty period, we
believe in a fair go.
•
Even though a product shows signs of accidental damage, scratches and the like, we will not automatically fail the warranty claim, if the fault is NOT caused by a drop or misuse and is
a genuine warranty failure then we will cover it.
•
Our aim is to return repaired or replaced products as soon as possible as we know that being without your tool can be inconvenient. Our goal is a 72 hour turnaround (3 working
days) after receiving it. Sometimes, however, a product with an intermittent fault may need extended testing to make sure we have made a full repair.
•
Calibration is not covered by warranty much the same as the wheel balance on your car is not covered by warranty.
Now The Details and Legals
CMI Industries Pty Ltd provides consumers with a warranty to our products, this is in addition to the requirements of any relevant legislation such as the Competition and Consumer Act 2010.
Definitions:
“CMI”, “We” or “Our” refers to CMI Industries Pty Ltd (ABN 29 102 713 922) of Unit 2 181-183 Thompson Rd, Bell Park, Victoria 3215 ph 1800 769 858
“You” or “Consumer” refers to the initial purchaser of the product.
“Product” refers to goods manufactured by or for CMI Industries Pty Ltd under the brands of RedBack Lasers, Level1Laser and UniLevel and include Laser and Optical Levels, Measuring tools and
accessories.
“Material” refers to material or component used in the construction and manufacture of the product.
“Workmanship” refers to handling, assembly and manufacturing processes done by or for CMI Industries Pty Ltd in order to manufacture the products.
“Warranty Period” varies depending on brand and model sold by CMI please see table at end for your products warranty period. Warranty period is from original purchase date only, no extension is
made in the event of warranty replacement products being supplied or time spent being repaired.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
CMI warrants that our products will be free from defects in material and workmanship for the stated period for the product supplied (see “warranty period” following)
CMI promises to repair or replace, free of charge, the product or part of product if found to be faulty due to defective workmanship or materials within the duration of the warranty stated as long as
the following terms and conditions are met;
•
Product must not have been misused or abused, must not have incurred accidental damage or had un-authorised repair or tampering that has caused or contributed to its fault or
failure.
•
You must contact CMI by phone, mail or email immediately when a fault or defect has become apparent and within the warranty period.
•
Product must be returned to store of purchase or directly to CMI, we will cover cost of postage only when sent by our reply paid Australia Post service (Australian Mainland and
Tasmania only) details provided upon phone, post or email with us.
•
CMI will cover cost of freight back of repaired or replaced product to original purchase store or you directly (depending on how it was sent Australian Mainland and Tasmania only).
•
CMI will determine whether repair or replacement of product or part of product will be made on the merits of each case.
•
Further exclusions in this warranty include damage or defect caused by use of non-original accessories or parts, damage in transportation, normal wear and tear, damage through
moisture, damage due to electric surge, failure due to neglect or damaged caused by adjustments not outlined in CMI’s instructions.
Subject to the requirements of all applicable Australian Acts or legislation and to the extent permitted by law, CMI accepts no liability (whether expressed or implied) of any nature whatsoever for
any loss of earnings, hiring of replacement equipment, Inaccurate work carried out by the consumer or agent, damage or injury arising as a result of any fault in the product. It is the consumer’s
responsibility to maintain good working practices and regularly test their tools for accuracy and serviceability.
Calibration of the product is not covered by warranty subject to the requirement of all applicable Australian Acts or legislation and to the extent permitted by law.
Any product returned to CMI that fails to fall within the terms and conditions of this warranty will be quoted for repair.
All correspondence through the following channels; CMI Industries Pty Ltd, P.O. Box 7324 Geelong West, Vic 3218. Ph: 1800 769 858 email:via
www.redbacklasers.com.au/contacts.html
Specifications
Laser Output (H/V): Green Class 3r 500nm - 550nm <5mW
Accuracy: +/- 2mm/10m
Range: Visible up to 40m (Dependent on Ambient Light)
Range: Using OPTIONAL LLR705 receiver 40m (all lighting conditions)
Warranty: 12 Months
