EN
- 3 -
● When the temperature is low or the machine is not used for a longer time, the temperature of the first cup of hot water will
be low.
● Do not leave the machine if you do not use the quantitative water intake function when getting water, so as not to cause
overflow; to avoid scalding, please do not move the cup when hot water is getting out!
● There might be a few drops of residual water dripping from the hot water outlet after using. To avoid scalding of residual
water, please take the cup carefully after the hot water outlet stops dripping!
● The temperature of warm water could be high if you have got hot water from the machine just now or a few minutes
before. Please protect yourself from scalding.
● To avoid scalding, please ensure that the hot water outlet function has been turned off after using or before leaving the
machine!
● Please press the raw water container in place during installation, otherwise water seepage may occur due to poor sealing.
● A small amount of water will flow out after picking up the water container, and may eventually penetrate into the placing
table. Please clean up in time if there is any.
● Please clean the collected water in the water receiver in time to avoid overflow. The machine cannot be used without the
water receiver.
● When the raw water container is short of water, it is normal for the machine to continue to work for a period of time.
Please add water in time (the machine can be used normally only after the raw water container has been lifted up and then
installed again).
● With the upgrading of the product, some text or patterns in the instruction manual may be different from the real product.
Please refer to the real product!
● The Company will not be responsible for any consequences caused by failure to follow the precautions mentioned above.
● This appliance is not intended for use by persons (including children) with reduced physical,sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
● Children should be supervised to ensure that they do not play with the appliance.
● The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
● If the supply cord is damaged, it must be replaced by your local Pureit dealer in order to avoid a hazard.
● This appliance is intended to be used in household and similar applications such as:
—
staff kitchen areas in shops, offices and other working environments;
—
farm houses;
—
by clients in hotels, motels and other residential type environments.
● Please do not remove or damage the connector of parts to prevent leakage.
● The device will automatic flush the internal waterways when switch on the power supply.
● The heating element surface is subject to residual heat after use, please do not touch to avoid accidental scalding.
