Unilever pureit CR5240, Instruction Manual

EN

- 7 -

Scope of Application

Water temperature 

adjustment button and 

water temperature 

indicator light

● Setting: the default temperature for water taking is normal temperature. Touch the "water temperature" button 

and the water temperature indicator light is on in turn: warm water (about 45 °C) - boiling water (about 98 °C) - 

normal temperature;

Water volume 

adjustment button 

and water volume 

indicator light

● Setting: the default volume for water taking is large cup volume (about 500 mL), touch the "water volume" 

button and the water volume indicator light is on in turn: middle cup (about 350 mL) - small cup (about 240 mL) - 

large cup (about 500 mL);

Water outlet button 

and water outlet 

button indicator light

● From energy-saving mode to working mode: Only "Pureit" and "water outlet" buttons are displayed in energy-

saving mode; touch the "water outlet" button to wake up the screen to enter the working mode; the TDS digital 

tube, service life indicator light of the filter , water temperature button, water outlet button and water volume button 

are on in working mode, and water can be taken by touch buttons (the purifier will automatically enter the energy-

saving mode if there is no button operation after 3 minutes of water taking);

● Get normal temperature water: Touch the "water outlet" button, the indicator light ring will rotate and flash, then 

the normal temperature water can be taken (the default water temperature of the purifier is normal temperature, and 

the default water volume is large cup volume (about 500 mL));

● Stop getting normal temperature water:

Touch any button of "water outlet" / "water temperature" / "water volume" to stop water;

● Take constant temperature and volume water:

First touch the "water temperature" button, the water temperature indicator light is on in turn (range: warm water 

(about 45 °C) - boiling water (about 98 °C) - normal temperature); then touch the "water volume" button, the water 

quantity indicator light is on in turn (range: middle cup (about 350 mL) - small cup (about 240 mL) - large cup 

(about 500 mL)); after setting, touch the "water outlet" button, and the purifier will produce the water with constant 

temperature and volume (please read the "child-lock button and child-lock button indicator light" section for boiling 

water).

● Stop getting constant temperature and volume water:

Touch any button of "water outlet" / "water temperature" / "water volume" to stop water;

● Forced water discharge function:

Press the "water outlet" button for 10 seconds, turn on the forced water discharge function, and drain the water 

in the internal purified water container (with the volume of about 1.5 L) of the purifier (please open the water 

container cap to stop the water purification during forced water discharge);

Child-lock button 

and child-lock button 

indicator light

● Unlock:

When touching the "water temperature" button to the "boiling water" water temperature indicator light, the "child-

lock" button lights up and flashes; when touching the "child-lock" button to unlock, the "child-lock" button stops 

flashing, and the purifier will directly emit boiling water (it is not necessary to click the "water outlet" button again);

● Lock:

After getting the boiling water, the "child-lock" button flashes for 6 seconds. If there is no button operation, the 

"child-lock" button will turn off automatically after 6 seconds (at the same time, the "normal temperature" water 

temperature indicator light lights up);

● Cancel "child-lock" button:

When touching the "water temperature" button to the "boiling water" water temperature indicator light, the 

"child-lock" button lights up and flashes; press the "child-lock" button for 6 seconds to cancel the "child-lock" 

button; when canceling the "child-lock" button, touch the "water temperature" button to the "boiling water" water 

temperature indicator light, and then touch the "water outlet" button to get boiling water directly; Note: The "child-

lock" button function is enabled by default to prevent accidental scald to young children caused by accidental touch; 

when the user can ensure the safety of getting water and does not need the "child-lock" button function, the function 

can be canceled selectively.

● Restore "child-lock" button:

Touch the "water temperature" button and "water outlet" button for 6 seconds simultaneously to restore the "child-

lock" button function;

The machine is applicable to household and similar places.