Impact Wrench
1
Safety
The machine should be stop after long time use if overheating until cooled to proper temperature .In order not to
damage the machine
•
The machine should be used in the environment where the temperature is between 5-40
℃
. So do not put it
in outdoor or keep in the car.
•
The battery can be restored by short charge if it was protected by an over current protection.
•
The machine should be stopped after long time use if overheating until cooled to proper temperature, in
order not to damage the machine.
Work Area
•
Keep your work area clean and well lit.
•
Cluttered benches and dark area invite accidents.
•
Do not operate power tools in explosive atmospheres such as in the presence of flammable liquids, gases,
or dust. Power tools create sparks which may ignite the dust or ruins.
•
Keep by standers, children and visitors away while operating a power tools. Distractions can cause you to
lose control.
Electrical Safety
•
Don’t expose power tools to rain or wet conditions. Water entering a power tools will increase the risk of
electric shock.
•
Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away
from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase
the risk of electric shock.
•
When operating a power tools outside, use an outdoor extension cord marked “WA” or “W”. These cords are
rated for outdoor use and reduce the risk of electric shock.
Personal Safety
•
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tools
while tried or under the influence of drugs, alcohol, or medication. A moment of inattention while operating
power can result in serious personal injury.
•
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes like jewellery or long hair can be caught in moving parts.
•
Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the
switch or plugging in tools that have the switch or plugging in tools that have the switch on invites accidents.
•
Remove adjusting keys or switches before turning the tool on. A switch or a key that is left attached to the
tool or rotating part may result in personal injury. Please check the sockets carefully be using.
•
Use safety equipment. Always wear eye protection. Dust mask, non-skin safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
