6
Sanding machine with sanding belt
•
Use eye protective goggles.
•
If your work produces a lot of dust, use protective mask and safety goggles.
•
Hold your machine with both hands. Use both handles.
•
Before switching your machine on make sure that the sanding belt is not touching the surface of the work
piece.
•
After you have switched the machine on, wait until the belt reaches its full speed.
•
Do not touch the spinning machine parts.
Power equipment
•
If your machine is equipped with depressed springs, use suitable device to release them slowly and safely.
•
Before throwing the packaging material out, make sure no part is left inside. If so, take it out and install it.
Use the part listing for check-up and the installation drawing for guidance.
OPERATION
ASSEMBLY
1. Front handle
2. Rear handle
3. Start switch
4. Safety button
5. Sawdust bag
6. Sawdust vacuum outlet
7. Carbon brushes cover
8. Adjustment handle
11
If the machine breaks down, send it back to the vendor for quick repair.
Please, enclose brief description of the defect. That makes repair easier. If the machine is still covered by
warranty, enclose the warranty card and proof of purchase receipt. After the warranty period expires, we
repair your machine for a special price.
To prevent possible damages during shipping, packed the machine carefully or use the original packaging
material. We are not liable for shipping damages due to incorrect packaging of your machine. If making
a claim at the shipping company the level and method of packaging plays a major role during claim evaluation
process.
Note:
Pictures and contents in this manual may slightly differ from the actual product or accessories.
It is due to continuous improvement of our products. Such small differences have no effect on the product
functionality.
CAUTION
