24
UDR-204(C) Operation manual Revision 3.0
2. Basic operation procedures
2.1 Power On/Off
2.1.1 Power
on
Using either the keypad or the remote control, press the “Power” button. (Note: In case of
power outage or rare instance of system failure, the DVR will reboot automatically)
The Power LED light will turn from red to green when it has turned on properly.
In a standby mode, the LED is red.
2.1.2 Power
OFF
In order to shutdown the system, you must type in the password. The default password for
shutdown is “111111”.
2.2 Date & time setting
Set the date and time for the DVR.
(
System Setup in Main Menu
Time/Date
)
2.3 Password setting procedure
Select or change your password for the DVR. The password must be a 6-digit number
consisting of numbers 0 ~ 4.
(
System Setup in Main Menu
System Password
)
2.4 Network setting
There are three types of network setting for the DVR: Static, DHCP, or PPPoE. Please set
the network type. (
Network Setup in Main Menu
)
2.5 Recording
Select recording related parameters in the Record Setup in the main menu.
